Propriétés de surface des fibres de carbone déterminées par chromatographie gazeuse inverse
J. Chim. Phys., 84 (1987) 231-237
Published online: 2017-05-29
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Inverse Gas Chromatography to Characterize the Surface Properties of Solid Materials
Tayssir HamiehChemistry of Materials 36 (5) 2231 (2024)
https://doi.org/10.1021/acs.chemmater.3c03091
Surface Thermodynamic Properties of Styrene–Divinylbenzene Copolymer Modified by Supramolecular Structure of Melamine Using Inverse Gas Chromatography
Tayssir Hamieh and Vladimir Yu Gus'kovChemistry 6 (5) 830 (2024)
https://doi.org/10.3390/chemistry6050050
The Effect of Temperature on the Surface Energetic Properties of Carbon Fibers Using Inverse Gas Chromatography
Tayssir HamiehCrystals 14 (1) 28 (2023)
https://doi.org/10.3390/cryst14010028
22 (2021)
https://doi.org/10.1007/978-1-56990-720-7_2
Rubber Reinforcement with Particulate Fillers
Meng-Jiao Wang and Michael MorrisRubber Reinforcement with Particulate Fillers 22 (2021)
https://doi.org/10.3139/9781569907207.002
Study of the temperature effect on the surface area of model organic molecules, the dispersive surface energy and the surface properties of solids by inverse gas chromatography
Tayssir HamiehJournal of Chromatography A 1627 461372 (2020)
https://doi.org/10.1016/j.chroma.2020.461372
Influence of diazonium and surfactant modification of the mesoporous material on its adsorption properties
Mariusz Sandomierski, Kornelia Poniedziałek, Katarzyna Bielicka-Daszkiewicz and Adam VoelkelChemical Papers 74 (3) 929 (2020)
https://doi.org/10.1007/s11696-019-00926-3
Evaluation of the physico-chemical properties of hydrocarbons-exposed bacterial biomass
Wojciech Smułek, Agata Zdarta, Adam Grzywaczyk, et al.Colloids and Surfaces B: Biointerfaces 196 111310 (2020)
https://doi.org/10.1016/j.colsurfb.2020.111310
Synthesis, characterization, and possible application as sorbents of new low-cost aluminosilicate materials with different Si/Al ratios
Kornelia Poniedziałek, Mariusz Sandomierski, Beata Strzemiecka, Katarzyna Bielicka-Daszkiewicz and Adam VoelkelInternational Journal of Materials Research 110 (6) 551 (2019)
https://doi.org/10.3139/146.111775
Mechanically robust and thermally stable abrasive tools from phenolic resins reinforced with diazonium‐modified zeolites
Mariusz Sandomierski, Beata Strzemiecka, Wojciech Koczorowski, Mateusz Barczewski, Małgorzata Kasperkowiak, Monika Pokora, Bartłomiej Borek, Mohamed M. Chehimi and Adam VoelkelPolymer Composites 40 (8) 3209 (2019)
https://doi.org/10.1002/pc.25174
Influence of Change of Si/Al Ratio on the Synthesis of Mesoporous Aluminosilicates and Flexural Strength of Novolac Composites
Beata Strzemiecka, Mariusz Sandomierski and Adam VoelkelJournal of Inorganic and Organometallic Polymers and Materials 29 (5) 1439 (2019)
https://doi.org/10.1007/s10904-019-01076-5
Properties data of phenolic resins synthetized for the impregnation of saturating Kraft paper
Marion Thébault, Andreas Kandelbauer, Iris Eicher, Björn Geyer and Edith Zikulnig-RuschData in Brief 20 345 (2018)
https://doi.org/10.1016/j.dib.2018.07.006
Clay-Polymer Nanocomposites
Youssef Snoussi, Ahmed M. Khalil, Beata Strzemiecka, Adam Voelkel and Mohamed M. ChehimiClay-Polymer Nanocomposites 363 (2017)
https://doi.org/10.1016/B978-0-323-46153-5.00011-2
Characteristics of Multifunctional, Eco-Friendly Lignin-Al2O3 Hybrid Fillers and Their Influence on the Properties of Composites for Abrasive Tools
Łukasz Klapiszewski, Artur Jamrozik, Beata Strzemiecka, Iwona Koltsov, Bartłomiej Borek, Danuta Matykiewicz, Adam Voelkel and Teofil JesionowskiMolecules 22 (11) 1920 (2017)
https://doi.org/10.3390/molecules22111920
The effect of bonding system application on surface characteristics of bovine dentin and enamel
Zuzanna Okulus, Tomasz Buchwald, Beata Czarnecka and Adam VoelkelMaterials Science and Engineering: C 76 1224 (2017)
https://doi.org/10.1016/j.msec.2017.03.205
Surface energy of bovine dentin and enamel by means of inverse gas chromatography
Zuzanna Okulus, Beata Strzemiecka, Beata Czarnecka, Tomasz Buchwald and Adam VoelkelMaterials Science and Engineering: C 49 382 (2015)
https://doi.org/10.1016/j.msec.2015.01.038
Improved thermostability and interfacial matching of nanoclay filler and ethylene vinyl alcohol matrix by silane‐modification
Björn Geyer, Stefan Röhner, Günter Lorenz and Andreas KandelbauerJournal of Applied Polymer Science 132 (1) (2015)
https://doi.org/10.1002/app.41227
Estimation of the work of adhesion by means of inverse gas chromatography for polymer complex systems
Beata Strzemiecka and Adam VoelkelInternational Journal of Adhesion and Adhesives 38 84 (2012)
https://doi.org/10.1016/j.ijadhadh.2012.05.006
Examination of zeolites as fragrance carriers
Beata Strzemiecka, Małgorzata Kasperkowiak, Marek Łożyński, Dominik Paukszta and Adam VoelkelMicroporous and Mesoporous Materials 161 106 (2012)
https://doi.org/10.1016/j.micromeso.2012.05.024
Interface Science and Composites
Soo-Jin Park and Min-Kang SeoInterface Science and Technology, Interface Science and Composites 18 59 (2011)
https://doi.org/10.1016/B978-0-12-375049-5.00002-5
Characterization of zeolites as potential new generation fillers in abrasive articles. Physicochemical properties of zeolites and their interactions with resins
Beata Strzemiecka, Adam Voelkel and Małgorzata KasperkowiakColloids and Surfaces A: Physicochemical and Engineering Aspects 372 (1-3) 80 (2010)
https://doi.org/10.1016/j.colsurfa.2010.09.029
XPS and IGC characterization of steam treated triticale straw
Liyan Zhao and Yaman BolukApplied Surface Science 257 (1) 180 (2010)
https://doi.org/10.1016/j.apsusc.2010.06.060
Chromatographic characterisation of ordered mesoporous silicas
H. Grajek, J. Paciura-Zadrożna and Z. WitkiewiczJournal of Chromatography A 1217 (18) 3105 (2010)
https://doi.org/10.1016/j.chroma.2010.02.028
On the effect of a non-ionic surfactant on the surface of sucrose crystals and on the crystal growth process by inverse gas chromatography
K. Vasanth Kumar and F. RochaJournal of Chromatography A 1216 (48) 8528 (2009)
https://doi.org/10.1016/j.chroma.2009.09.077
Determination of Hansen Solubility Parameters by Means of Gas-Solid Inverse Gas Chromatography
Adam Voelkel, Kalina Batko, Katarzyna Adamska and Beata StrzemieckaAdsorption Science & Technology 26 (1-2) 93 (2008)
https://doi.org/10.1260/026361708786035378
Characterization of fillers used in abrasive articles by means of inverse gas chromatography and principal component analysis
Adam Voelkel and Beata StrzemieckaInternational Journal of Adhesion and Adhesives 27 (3) 188 (2007)
https://doi.org/10.1016/j.ijadhadh.2006.03.003
Surface characterization of poly(lactic acid) and polycaprolactone by inverse gas chromatography
D. Cava, R. Gavara, J.M. Lagarón and A. VoelkelJournal of Chromatography A 1148 (1) 86 (2007)
https://doi.org/10.1016/j.chroma.2007.02.110
Methods of determining polar and non-polar sites on carbonaceous adsorbents. The contribution of the linear solvation energy relationship approach
P. Burg, M.H. Abraham and D. CagniantCarbon 41 (5) 867 (2003)
https://doi.org/10.1016/S0008-6223(03)00018-6
New approach to characterise physicochemical properties of solid substrates by inverse gas chromatography at infinite dilution
Tayssir Hamieh and Jacques SchultzJournal of Chromatography A 969 (1-2) 27 (2002)
https://doi.org/10.1016/S0021-9673(02)00358-8
New approach to characterise physicochemical properties of solid substrates by inverse gas chromatography at infinite dilution
Tayssir Hamieh and Jacques SchultzJournal of Chromatography A 969 (1-2) 17 (2002)
https://doi.org/10.1016/S0021-9673(02)00368-0
Study of the Second Order Transitions and Acid–Base Properties of Polymers Adsorbed on Oxides by Using Inverse Gas Chromatography at Infinite Dilution
Tayssir Hamieh, Mustapha Rezzaki and Jacques SchultzJournal of Colloid and Interface Science 233 (2) 339 (2001)
https://doi.org/10.1006/jcis.2000.7267
Contact angle and IGC measurements for probing surface-chemical changes in the recycling of wood pulp fibers
William T. Tze and Douglas J. GardnerJournal of Adhesion Science and Technology 15 (2) 223 (2001)
https://doi.org/10.1163/156856101743427
Study of the transition temperatures and acid–base properties of poly (methyl methacrylate) adsorbed on alumina and silica, by using inverse gas chromatography technique
Tayssir Hamieh, Mustapha Rezzaki and Jacques SchultzColloids and Surfaces A: Physicochemical and Engineering Aspects 189 (1-3) 279 (2001)
https://doi.org/10.1016/S0927-7757(01)00597-0
Econometric Analysis in FTC v. Staples
Jonathan B. BakerJournal of Public Policy & Marketing 18 (1) 11 (1999)
https://doi.org/10.1177/074391569901800103
Etude des propriétés acido-basiques et énergie interfaciale des oxydes et hydroxydes métalliques
Tayssir HamiehComptes Rendus de l'Académie des Sciences - Series IIB - Mechanics-Physics-Chemistry-Astronomy 325 (6) 353 (1997)
https://doi.org/10.1016/S1251-8069(97)81154-2
Influence of fluorination on the properties of carbon fibres
A. Bismarck, R. Tahhan, J. Springer, et al.Journal of Fluorine Chemistry 84 (2) 127 (1997)
https://doi.org/10.1016/S0022-1139(97)00029-8
Review: Inverse Gas Chromatography for the Characterization of Polymer Blends
Zeki Y. Al-saighInternational Journal of Polymer Analysis and Characterization 3 (3) 249 (1997)
https://doi.org/10.1080/10236669708032768
Surface acid-base properties of carbon fibers
Tayssir HamiehAdvanced Powder Technology 8 (4) 279 (1997)
https://doi.org/10.1016/S0921-8831(08)60601-9
Adsorption on New and Modified Inorganic Sorbents
F.J. López Garzón and M. Domingo GarciaStudies in Surface Science and Catalysis, Adsorption on New and Modified Inorganic Sorbents 99 517 (1996)
https://doi.org/10.1016/S0167-2991(06)81034-7
Wettability and Adhesion Characteristics of Plasma-Treated Carbon Fibers
K. Tsutsumi, K. Ban, K. Shibata, S. Okazaki and M. KogomaThe Journal of Adhesion 57 (1-4) 45 (1996)
https://doi.org/10.1080/00218469608013642
An overview of the basic aspects of polymer adhesion. Part I: Fundamentals
Georges FourchePolymer Engineering & Science 35 (12) 957 (1995)
https://doi.org/10.1002/pen.760351202
Comparison of surface-chemical methods for characterizing carbon fiber-epoxy resin composites
H.-J. Jacobasch, K. Grundke, P. Uhlmann, F. Simon and E. MÄDERComposite Interfaces 3 (4) 293 (1995)
https://doi.org/10.1163/156855495X00093
Determination of acid–base properties of solid materials by inverse gas chromatography at infinite dilution. A novel empirical method based on the dispersive contribution to the heat of vaporization of probes
Mohamed M. Chehimi and Emmanuelle Pigois-LandureauJ. Mater. Chem. 4 (5) 741 (1994)
https://doi.org/10.1039/JM9940400741
Characterization of Composite Materials
DARYL WILLIAMSCharacterization of Composite Materials 80 (1994)
https://doi.org/10.1016/B978-0-7506-9386-8.50012-5
Fundamentals of Adsorption, Proceedings of the Fourth International Conference on Fundamentals of Adsorption
Kazuo Tsutsumi and Kazutaka BanStudies in Surface Science and Catalysis, Fundamentals of Adsorption, Proceedings of the Fourth International Conference on Fundamentals of Adsorption 80 679 (1993)
https://doi.org/10.1016/S0167-2991(08)63576-4
Characterization and modification of fillers for paints and coatings
Henri Balard and Eugéne PapirerProgress in Organic Coatings 22 (1-4) 1 (1993)
https://doi.org/10.1016/0033-0655(93)80011-X
Effect of WO3 loading on the surface acidity of WO3/Al2O3 composite oxides
R. Zhang, J. Jagiello, J.F. Hu, et al.Applied Catalysis A: General 84 (2) 123 (1992)
https://doi.org/10.1016/0926-860X(92)80111-O
Inverse gas chromatography of lignocellulosic fibers coated with a thermosetting polymer: Use of peak maximum and conder and young methods
Donatien Pascal Kamdem and Bernard RiedlJournal of Colloid and Interface Science 150 (2) 507 (1992)
https://doi.org/10.1016/0021-9797(92)90219-C
Surface energy and adsorption energy distribution measurements on some carbon blacks
Eugène Papirer, Sheng Li, Henri Balard and Jacek JagielloCarbon 29 (8) 1135 (1991)
https://doi.org/10.1016/0008-6223(91)90031-D
A study of the acidic properties of pure and composite oxides by inverse gas chromatography at infinite dilution
Cr. Contescu, J. Jagiello and J.A. SchwarzJournal of Catalysis 131 (2) 433 (1991)
https://doi.org/10.1016/0021-9517(91)90277-B
IGC Characterization of PMMA Grafted onto CTMP Fiber
Donatien P. Kamdem and Bernard RiedlJournal of Wood Chemistry and Technology 11 (1) 57 (1991)
https://doi.org/10.1080/02773819108050262
Acid-base character of carbon fiber surfaces
R.S. Farinato, S.S. Kaminski and J.L. CourterJournal of Adhesion Science and Technology 4 (1) 633 (1990)
https://doi.org/10.1163/156856190X00577
Controlled Interphases in Composite Materials
Daryl WilliamsControlled Interphases in Composite Materials 219 (1990)
https://doi.org/10.1007/978-94-011-7816-7_22
Characterization of specific interactions capacity of solid surfaces by adsorption of alkanes and alkenes. Part II: Adsorption on crystalline silica layer surfaces
G. Ligner, M. Sidqi, J. Jagiello, H. Balard and E. PapirerChromatographia 29 (1-2) 35 (1990)
https://doi.org/10.1007/BF02261136
Surface characteristics of commercial carbon fibres determined by inverse gas chromatography
M Nardin, H Balard and E PapirerCarbon 28 (1) 43 (1990)
https://doi.org/10.1016/0008-6223(90)90091-C
Determination of the surface free energy of modified carbon fibers and its relation to the work of adhesion
K. Tsutsumi, S. Ishida and K. ShibataColloid & Polymer Science 268 (1) 31 (1990)
https://doi.org/10.1007/BF01410420
The dynamic adsorption of several hydrocarbons on active carbons
M Domingo-García, I Fernández-Morales, F.J López-Garzón, C Moreno-Castilla and M.J Prados-RamírezJournal of Colloid and Interface Science 136 (1) 160 (1990)
https://doi.org/10.1016/0021-9797(90)90086-4
Surface characterization of modified glass fibers by inverse gas chromatography
K. Tsutsumi and T. OhsugaColloid & Polymer Science 268 (1) 38 (1990)
https://doi.org/10.1007/BF01410421
Characterization of specific interaction capacity of solid surfaces by adsorption of alkanes and alkenes. Part I: Adsorption on open surfaces
M. Sidqi, G. Ligner, J. Jagiello, H. Balard and E. PapirerChromatographia 28 (11-12) 588 (1989)
https://doi.org/10.1007/BF02260683
La mouillabilité
Lisette LavielleAnnales de Physique 14 (1) 1 (1989)
https://doi.org/10.1051/anphys:019890014010100
London component of the surface energy of heat-treated silicas
Gilbert Ligner, Alain Vidal, Henri Balard and Eugène PapirerJournal of Colloid and Interface Science 133 (1) 200 (1989)
https://doi.org/10.1016/0021-9797(89)90293-2