Mechanical activation of solids and its application to technology
J. Chim. Phys., 83 (1986) 821-829
Published online: 2017-05-29
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
β-starch amorphization via mechanochemical treatment and the molecular weight dependence of the drug release of milled amorphous starch gel-matrix tablets
Makoto Otsuka, Tomomi Takaku, Yusuke Hattori and Tetsuo SasakiJournal of Drug Delivery Science and Technology 100 106108 (2024)
https://doi.org/10.1016/j.jddst.2024.106108
Mechanochemical Synthesis of Solid Catalysts and Application in Catalytic Reaction
Lin Yang, Zhendong Pan and Zhijian TianChemCatChem 16 (10) (2024)
https://doi.org/10.1002/cctc.202301519
Nanostructured YbMn1−хFeхO3 and its physical properties
Zhengyou Li, Kamaludin Abdulvakhidov, Sergey Soldatov, et al.Journal of Materials Science: Materials in Electronics 34 (15) (2023)
https://doi.org/10.1007/s10854-023-10657-7
Mechanochemical Effect on Controlled Drug Release of Konjac Glucomannan Matrix Tablets during Dry Grinding
Fuminori Okazaki, Yusuke Hattori, Tetsuo Sasaki and Makoto OtsukaGels 8 (3) 181 (2022)
https://doi.org/10.3390/gels8030181
Mechanical milling of hydrothermally obtained CaTiO3 powders—morphology and photocatalytic activity
D. Stoyanova, I. Stambolova, V. Blaskov, et al.Nano-Structures & Nano-Objects 18 100301 (2019)
https://doi.org/10.1016/j.nanoso.2019.100301
Effects of different mechanical treatments on structural changes of lignocellulosic waste biomass and subsequent Cu(II) removal kinetics
Zorica R. Lopičić, Mirjana D. Stojanović, Smilja B. Marković, et al.Arabian Journal of Chemistry 12 (8) 4091 (2019)
https://doi.org/10.1016/j.arabjc.2016.04.005
Mechanochemical effect on swelling and drug release of natural polymer matrix tablets by X-ray computed tomography
Yusuke Hattori, Tomomi Takaku and Makoto OtsukaInternational Journal of Pharmaceutics 539 (1-2) 31 (2018)
https://doi.org/10.1016/j.ijpharm.2018.01.020
Mechanochemistry in Siberia
V. V. BoldyrevHerald of the Russian Academy of Sciences 88 (2) 142 (2018)
https://doi.org/10.1134/S1019331618020016
Influence of Mechanically Activated Electric Arc Furnace Slag on Compressive Strength of Mortars Incorporating Curing Moisture and Temperature Effects
Muhammad Amin, Kaffayatullah Khan, Muhammad Saleem, Nauman Khurram and Muhammad NiaziSustainability 9 (8) 1178 (2017)
https://doi.org/10.3390/su9081178
Morphological Investigation and Fractal Properties of Realgar Nanoparticles
Amir Lashgari, Shahriar Ghamami, Zahra Bahrami, Farzaneh Shomossi, Guillermo Salgado-Morán, Daniel Glossman-Mitnik and Xiaosheng FangJournal of Nanomaterials 2015 (1) (2015)
https://doi.org/10.1155/2015/130698
Introduction to Solid State Ionics
Introduction to Solid State Ionics 15 (2015)https://doi.org/10.1201/b19496-4
Complexities of mechanochemistry: elucidation of processes occurring in mechanical activators via implementation of a simple organic system
Adam A. L. Michalchuk, Ivan A. Tumanov and Elena V. BoldyrevaCrystEngComm 15 (32) 6403 (2013)
https://doi.org/10.1039/c3ce40907d
Harnessing mechanochemical effects with ultrasound-induced reactions
Giancarlo Cravotto and Pedro CintasChem. Sci. 3 (2) 295 (2012)
https://doi.org/10.1039/C1SC00740H
Effect of mechanical activation on the barite carbothermic reduction
D. Guzmán, J. Fernández, S. Ordoñez, et al.International Journal of Mineral Processing 102-103 124 (2012)
https://doi.org/10.1016/j.minpro.2011.11.008
Mechanically-Induced Chemical Changes in Polymeric Materials
Mary M. Caruso, Douglas A. Davis, Qilong Shen, et al.Chemical Reviews 109 (11) 5755 (2009)
https://doi.org/10.1021/cr9001353
Mechanical activation of granulated blast furnace slag and its effect on the properties and structure of portland slag cement
Sanjay Kumar, Rakesh Kumar, A. Bandopadhyay, et al.Cement and Concrete Composites 30 (8) 679 (2008)
https://doi.org/10.1016/j.cemconcomp.2008.05.005
Mechanochemistry in Nanoscience and Minerals Engineering
Peter BalážMechanochemistry in Nanoscience and Minerals Engineering 297 (2008)
https://doi.org/10.1007/978-3-540-74855-7_6
Mechanochemical modification of properties and reactivity of nanosized arsenic sulphide As4S4
P. Baláž, W.S. Choi and E. DutkováJournal of Physics and Chemistry of Solids 68 (5-6) 1178 (2007)
https://doi.org/10.1016/j.jpcs.2007.01.008
Forcing and Controlling Chemical Reactions with Ultrasound
Giancarlo Cravotto and Pedro CintasAngewandte Chemie International Edition 46 (29) 5476 (2007)
https://doi.org/10.1002/anie.200701567
Das Auslösen und Steuern chemischer Reaktionen durch Ultraschall
Giancarlo Cravotto and Pedro CintasAngewandte Chemie 119 (29) 5573 (2007)
https://doi.org/10.1002/ange.200701567
Ball-milling treatment effect on physicochemical properties and features for cassava and maize starches
Zu-Qiang Huang, Xin-ling Xie, Yuan Chen, Jian-ping Lu and Zhang-Fa TongComptes Rendus. Chimie 11 (1-2) 73 (2007)
https://doi.org/10.1016/j.crci.2007.04.008
An appreciation of the chemical approach of V. V. Boldyrev to the study of the decomposition of solids
A. K. Galwey and M. E. BrownJournal of Thermal Analysis and Calorimetry 90 (1) 9 (2007)
https://doi.org/10.1007/s10973-007-8472-2
153 81 (2006)
https://doi.org/10.1002/9781118406892.ch6
Direct Evidence Of Chemical Reactions Induced By Shear-Strains
John J. GilmanMRS Proceedings 800 (2003)
https://doi.org/10.1557/PROC-800-AA7.6
Ceramic pigments obtained by sol-gel techniques and by mechanochemical insertion of color centers in Al2O3 host matrix
Riccardo Ricceri, Silvia Ardizzone, Giovanni Baldi and Paolo MatteazziJournal of the European Ceramic Society 22 (5) 629 (2002)
https://doi.org/10.1016/S0955-2219(01)00376-4
Preparation of some metal phosphides by ball milling
L Takacs and S.K MandalMaterials Science and Engineering: A 304-306 429 (2001)
https://doi.org/10.1016/S0921-5093(00)01487-8
Electronic Basis of the Strength of Materials
Electronic Basis of the Strength of Materials 179 (2001)https://doi.org/10.1017/CBO9780511541247.017
Increased dissolution of ilmenite induced by high-energy ball milling
Y. Chen, J.S. Williams, S.J. Campbell and G.M. WangMaterials Science and Engineering: A 271 (1-2) 485 (1999)
https://doi.org/10.1016/S0921-5093(99)00441-4
Different oxidation reactions of ilmenite induced by high energy ball milling
Ying ChenJournal of Alloys and Compounds 266 (1-2) 150 (1998)
https://doi.org/10.1016/S0925-8388(97)00494-5
Mechanochemical reactions in the system FeTiO3–Si
Ying Chen and J. S. WilliamsJournal of Materials Research 13 (12) 3499 (1998)
https://doi.org/10.1557/JMR.1998.0477
Mechanically Enhanced Reactivity of Silicon for the Formation of Silicon Nitride Composites
Leon L. Shaw, Zhenguo Yang and Ruiming RenJournal of the American Ceramic Society 81 (3) 760 (1998)
https://doi.org/10.1111/j.1151-2916.1998.tb02407.x
Synthetic Organic Sonochemistry
Pedro Cintas and Jean-Louis LucheSynthetic Organic Sonochemistry 167 (1998)
https://doi.org/10.1007/978-1-4899-1910-6_5
Synthetic Organic Sonochemistry
André Loupy and Jean-Louis LucheSynthetic Organic Sonochemistry 107 (1998)
https://doi.org/10.1007/978-1-4899-1910-6_4
Mechanomaking of high speed steel AISI M2 powders fabrication
Paolo Matteazzi and Francois WolfMaterials Science and Engineering: A 246 (1-2) 235 (1998)
https://doi.org/10.1016/S0921-5093(97)00748-X
Mechanomaking of high speed steel AISI M2: powder consolidation
Paolo Matteazzi and Francois WolfMaterials Science and Engineering: A 248 (1-2) 19 (1998)
https://doi.org/10.1016/S0921-5093(98)00525-5
Low-Energy Mechanochemistry Formation of Silver and Copper Metals from Hemioxides
H. Szwarc and M. GasgnierJournal of Solid State Chemistry 136 (1) 51 (1998)
https://doi.org/10.1006/jssc.1997.7651
Synthesis of nanostructured materials by mechanical alloying
Paolo Matteazzi, Gerard Le Caër and Alain MocellinCeramics International 23 (1) 39 (1997)
https://doi.org/10.1016/0272-8842(95)00138-7
Mechanochemical reactions of ilmenite with different additives
Y. Chen, J.S. Williams and B. NinhamColloids and Surfaces A: Physicochemical and Engineering Aspects 129-130 61 (1997)
https://doi.org/10.1016/S0927-7757(97)00027-7
Handbook of Phase Transfer Catalysis
A. Loupy and J.-L. LucheHandbook of Phase Transfer Catalysis 369 (1997)
https://doi.org/10.1007/978-94-009-0023-3_11
Chemical and physical “hardness”
John J. GilmanMaterials Research Innovations 1 (2) 71 (1997)
https://doi.org/10.1007/s100190050023
Low-temperature oxidation of ilmenite (FeTiO3) induced by high energy ball milling at room temperature
Ying ChenJournal of Alloys and Compounds 257 (1-2) 156 (1997)
https://doi.org/10.1016/S0925-8388(97)00012-1
Mechanochemistry
John J. GilmanScience 274 (5284) 65 (1996)
https://doi.org/10.1126/science.274.5284.65
Mechanisms of Shear-Induced Solid-State Reactions
J. J. GilmanMRS Proceedings 453 (1996)
https://doi.org/10.1557/PROC-453-227
Influence of the nature of milling media on phase transformations induced by grinding in some oxides
S. Begin-Colin, G. Le Caër, M. Zandona, E. Bouzy and B. MalamanJournal of Alloys and Compounds 227 (2) 157 (1995)
https://doi.org/10.1016/0925-8388(95)01596-5
133 (1995)
https://doi.org/10.1002/9783527615179.ch04
Magnetic nanocomposites by reaction milling
M. Pardavi-Horvath and L. TakacsScripta Metallurgica et Materialia 33 (10-11) 1731 (1995)
https://doi.org/10.1016/0956-716X(95)00409-O
Mechanochemistry and sonochemistry
V.V BoldyrevUltrasonics Sonochemistry 2 (2) S143 (1995)
https://doi.org/10.1016/1350-4177(95)00019-3
Mechanosynthesis of nanocrystalline materials
G. Le Caër and P. MatteazziHyperfine Interactions 90 (1) 229 (1994)
https://doi.org/10.1007/BF02069130
Effect of ultrasound on heterogeneous systems
Jean-Louis LucheUltrasonics Sonochemistry 1 (2) S111 (1994)
https://doi.org/10.1016/1350-4177(94)90008-6
Superconductors, Surfaces and Superlattices
Rustum RoySuperconductors, Surfaces and Superlattices 719 (1994)
https://doi.org/10.1016/B978-1-4832-8382-1.50157-9
Ultrasonics International 93
Jean-Louis LUCHEUltrasonics International 93 19 (1993)
https://doi.org/10.1016/B978-0-7506-1877-9.50010-X
Metal-metal oxide systems for nanocomposite formation by reaction milling
L. TakacsNanostructured Materials 2 (3) 241 (1993)
https://doi.org/10.1016/0965-9773(93)90151-Z
Synthesis of Nanocrystalline Alumina–Metal Composites by Room‐Temperature Ball‐Milling of Metal Oxides and Aluminum
Paolo Matteazzi and Gerard Le CaërJournal of the American Ceramic Society 75 (10) 2749 (1992)
https://doi.org/10.1111/j.1151-2916.1992.tb05499.x
Stage formation of quasi-crystals during mechanical treatment of the cubic Frank-Kasper phase Mg32(Zn, Al)49
B. Bokhonov, I. Konstanchuk, E. Ivanov and V. BoldyrevJournal of Alloys and Compounds 187 (1) 207 (1992)
https://doi.org/10.1016/0925-8388(92)90534-G
Mechanically activated room temperature reduction of sulphides
Paolo Matteazzi and Gerard Le CaërMaterials Science and Engineering: A 156 (2) 229 (1992)
https://doi.org/10.1016/0921-5093(92)90155-T
Tribochemical equilibrium in mechanical alloying of metals
K. B. Gerasimov, A. A. Gusev, E. Y. Ivanov and V. V. BoldyrevJournal of Materials Science 26 (9) 2495 (1991)
https://doi.org/10.1007/BF01130201
Mechanochemistry and mechanical activation of solids
V. V. BoldyrevBulletin of the Academy of Sciences of the USSR Division of Chemical Science 39 (10) 2029 (1990)
https://doi.org/10.1007/BF01557732
Structure of amorphous ferrites of lanthanum, dysprosium, and bismuth
A.I. Rykov, Yu.t. Pavlukhin, N.I. Syrotina and V.V. BoldyrevReactivity of Solids 7 (1) 29 (1989)
https://doi.org/10.1016/0168-7336(89)80004-X
Mechanochemical synthesis of icosahedral phases in Mg-Zn-Al and Mg-Cu-Al alloys
E.Yu. Ivanov, I.G. Konstanchuk, B.D. Bokhonov and V.V. BoldyrevReactivity of Solids 7 (2) 167 (1989)
https://doi.org/10.1016/0168-7336(89)80026-9
ChemInform Abstract: Mechanical Activation of Solids and Its Application to Technology
V. V. BOLDYREVChemInform 18 (21) (1987)
https://doi.org/10.1002/chin.198721320