Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Application of augmented simplex‐centroïd mixture design in developing and optimizing new low‐cost microfiltration membranes from clays and cassava peels for bacteria removal

Ibrahim Cherif Mountapbeme, Emilia Enjema Lyonga Mbamyah, Amadou Pountouenchi, Saliou Njuhou, Mohamed Mouafon, Emma Julienne Augustine Ndzana, Yacouba Mfomboum Kouotou, Gisèle Laure Lecomte‐Nana and Dayirou Njoya
International Journal of Ceramic Engineering & Science 6 (5) (2024)
https://doi.org/10.1002/ces2.10231

Congo Red removal using Fesdis soil: kinetic, equilibrium and thermodynamic studies

Assia Chaib, Noura Boukhalfa and Amel Boudjemaa
International Journal of Environmental Analytical Chemistry 103 (15) 3447 (2023)
https://doi.org/10.1080/03067319.2021.1910246

Statistical optimization of the elaboration of ceramic membrane support using Plackett-Burman and response surface methodology

Mohamed Ait Baih, Hamza Saffaj, Khalid Aziz, et al.
Materials Today: Proceedings 52 128 (2022)
https://doi.org/10.1016/j.matpr.2021.11.269

Application of the Doehlert design for the defluoridation of industrial wastewater by adsorption onto natural clay

Mohamedou Ba, Abdessalem Ezzeddine, Sergey V. Dorozhkin and Mustapha Hidouri
Desalination and Water Treatment 264 141 (2022)
https://doi.org/10.5004/dwt.2022.28570

Characterization of ceramic pieces shaped from clay intended for the development of filtration membranes

Mohammed Messaoudi, Najib Tijani, Sara Baya, et al.
South African Journal of Chemical Engineering 37 1 (2021)
https://doi.org/10.1016/j.sajce.2021.03.004

The effect of chemical treatment on the mechanical and thermal properties of composite materials based on clay reinforced with sawdust

Fadhila Mouissa, Azzedine Benyahia, Mokhtar Djehiche, et al.
Matériaux & Techniques 109 (1) 101 (2021)
https://doi.org/10.1051/mattech/2021013

Étude de l’effet du temps de traitement alcalin de fibres palmier sur le comportement mécanique des matériaux à base d’argile rouge de la région de M’sila

Zainate Koadri, Azzedine Benyahia, Nadir Deghfel, et al.
Matériaux & Techniques 107 (4) 404 (2019)
https://doi.org/10.1051/mattech/2019031

Physico-mechanical and gas permeability characteristics of kaolin based ceramic membranes prepared with a new pore-forming agent

David O. Obada, David Dodoo-Arhin, Muhammad Dauda, et al.
Applied Clay Science 150 175 (2017)
https://doi.org/10.1016/j.clay.2017.09.014

Study of the combining adsorption-microfiltration process for the treatment of coloured waters

Miguel A. Rodriguez, Abdelah Addaou, Ali Laajeb, Ahmed Lahsini and Jilali Bentama
Boletín de la Sociedad Española de Cerámica y Vidrio 51 (3) 165 (2012)
https://doi.org/10.3989/cyv.242012

Elaboration and characterisation of low cost ceramic support membrane

S Fakhfakh, S Baklouti, S Baklouti and J Bouaziz
Advances in Applied Ceramics 109 (1) 31 (2010)
https://doi.org/10.1179/174367609X422234

Elaboration and characterization of microfiltration and ultrafiltration membranes deposited on raw support prepared from natural Moroccan clay: Application to filtration of solution containing dyes and salts

Nabil Saffaj, M. Persin, Saad Alami Younsi, et al.
Applied Clay Science 31 (1-2) 110 (2006)
https://doi.org/10.1016/j.clay.2005.07.002