Issue |
J. Chim. Phys.
Volume 88, 1991
|
|
---|---|---|
Page(s) | 631 - 641 | |
DOI | https://doi.org/10.1051/jcp/1991880631 | |
Published online | 29 May 2017 |
Effet des traitements thermiques sur la résistance à la corrosion en HCl molaire de l'alliage amorphe Fe-B-Si-C. Efficacité inhibitrice du diorthoaminophénoldisulfane (DOAPD)
1
Ecole Normale Supérieure (Takaddoum), Rabat.
2
Faculté des Sciences, Université Ibn-Tofail, Kenitra.
3
Faculté des Sciences, Université Mohamed V, Rabat, Maroc.
4
Laboratoire d'Électrochimie Interfaciale du CNRS, 1, place Aristide Briand, 92195 Meudon Cedex, France.
Les thermogrammes d'analyse thermique différentielle (A.T.D.) et les spectres de diffraction de rayons X ont été réalisés avec l'alliage amorphe Fe-B-Si-C avant et après recuit. La résistance à la corrosion en HCl molaire de l'alliage recuit et non recuit a été évaluée et comparée à celle du fer cristallin αFe. L'efficacité inhibitrice de diorthoaminophenoldisulfane (DOAPD) a été calculée dans tous les cas.
Abstract
Differential thermal analysis (D.T.A) thermographs and X-rays diffraction patterns for the amorphous alloy Fe-B-Si-C were performed before and after annealing. Corrosion resistances in IM HC1 of the annealed and unannealed alloy were evaluated and compared to that of crystalline αFe. The inhibition efficiencies of diorthoaminophenoldisulfane (DOAPD) were calculated in all cases.
© Elsevier, Paris, 1991