Issue |
J. Chim. Phys.
Volume 76, 1979
|
|
---|---|---|
Page(s) | 574 - 576 | |
DOI | https://doi.org/10.1051/jcp/1979760574 | |
Published online | 29 May 2017 |
Détermination d’une température de flamme à partir du spectre Raman de vibration de la vapeur d’eau*
Laboratoire de Spectroscopie Moléculaire, Université des Sciences et Techniques du Languedoc. Place Eugène Bataillon, 34060 Montpellier Cedex.
On recherche la température pour laquelle on obtient le meilleur accord entre le contour expérimental et le contour calculé de la bande Raman v1, de la vapeur d'eau contenue dans la flamme d'un chalumeau oxhydrique. La grande sensibilité à la température du tracé de cette bande permet une détermination assez précise et le résultat obtenu est très voisin de celui qu’avait donné une autre méthode utilisant le signal Raman de l'azote.
Abstract
As previously shown at low temperature, the v1, band of the Raman spectrum of water vapour is a good candidate for temperature determinations. At high temperature, the structure of the band remains complex and temperature sensitive. We had at our disposal experimental traces of the Raman spectrum of the v1 band of water from the flame of an oxyhydric blow-pipe, obtained at the General Electric Laboratories. A good lit with a computed trace, including the hot bands which have an important contribution of the total intensity was obtained by varying temperature. This temperature corresponding to the best fit was very close to that determined from the Raman signal of nitrogen introduced in the flame as temperature monitor.
© Paris : Société de Chimie Physique, 1979